Quilting Foot 1/4″ & Ruler Foot for Juki J-150 QVP & Long Arm Machines

Free motion presser foot used for free-motion sewing and ruler work

• With a distance of 1/4" (6.5 mm) from the needle entry point to the outer edge, use this presser foot for free motion quilting and to sew with a quilting ruler as a guide.

• Also compatible with the Juki J-150 QVP, J-350 QVP and J-350 QVP S, TL 2200 QVP and TL-2200 QVP-S

Part Number: 40125767

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.

• The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines

• The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver

Compatible with Juki TL machines and J-150 QVP. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9846D250A0

• By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.