Quilt Presser Foot for Computerized Machines

• With the feed dogs lowered, you can freely move the fabric to draw the stitching.
• Use the screw to adjust the height of the presser foot according to the thickness of the fabric, so the fabric moves smoothly.

This guide is used for sewing parallel rows of stitching that are equally spaced.

• This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.

• With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.

• Juki TL models include Juki TL 2010, Juki TL15, Juki TL2010Q, Juki TL2200, Juki TL2000Q, Juki TL 2000QI, Juki TL98, Juki TL18 Haruka, Juki TL2020PE, Juki 2200QVP Mini sewing machines.

Part Number: 40171424

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

This presser foot is used for sewing on nylon thread or wire for crafts.

• Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.

Series & Part Number

• MO-2800: 40138099
• MO-1000: 40138099
• MO-735: A9820-655-0A0A
• MO-114D/104D: A9820-655-0A0A
• MO-655: A9820-655-0A0A
• MO654DE/MO-644: A9820-655-0A0A
• MO-623: A9820-655-0A0A
• MO-1200QVP: A9820-655-0A0A
• MO-2000QVP: 40138099

This presser foot is used for sewing on piping while overlocking the edge of the fabric.

• Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.

Series & Part Number

• MO-2800: 40138103
• MO-1000: 40138103
• MO-735: A9865-655-0A0A
• MO-114D/104D: A9865-655-0A0A
• MO-655: A9865-655-0A0A
• MO654DE/MO-644: A9865-655-0A0A
• MO-623: A9865-655-0A0A
• MO-50e: 40131950
• MO-80CB: 40131950
• MO-1200QVP: A9865-655-0A0A
• MO-2000QVP: 40138103

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.

• The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves

• The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.

Compatible with Juki TL machines and J-150 QVP. Such as:

• • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9847D250A0