Presser Foot with Guide

• On the right side of the  presser foot, there are guidelines at a 2 mm spacing from 0 to 2 cm from the center of the needle entry opening (center needle position).
• This presser foot is useful when sewing parallel straight or decorative stitching.

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily.

Since the needle drops into a round opening, this presser foot reduces puckering when sewing lightweight materials, preventing skipped stitches as well as faulty stitching.

Compatible with all Juki TL models. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A98130960A0A

This presser foot is used for sewing on piping while overlocking the edge of the fabric.

• Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.

Series & Part Number

• MO-2800: 40138103
• MO-1000: 40138103
• MO-735: A9865-655-0A0A
• MO-114D/104D: A9865-655-0A0A
• MO-655: A9865-655-0A0A
• MO654DE/MO-644: A9865-655-0A0A
• MO-623: A9865-655-0A0A
• MO-50e: 40131950
• MO-80CB: 40131950
• MO-1200QVP: A9865-655-0A0A
• MO-2000QVP: 40138103

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.