This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. This gauge can be swung toward you so that it is out of the way when not in use.
Compatible with Juki TL machines and J-150 QVP. Such as:
This presser foot is used for sewing together two pieces of fabric while creating gathers.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.
The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves
The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.
Compatible with Juki TL machines and J-150 QVP. Such as:
This presser foot is used for sewing together two pieces of fabric while creating gathers.
Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
Gathers can also be created in a single piece of fabric.
Series & Part Number
MO-2800: 40138121
MO-1000: 40138121
MO-735: A9860-655-0A0C
MO-114D/104D: A9860-655-0A0C
MO-655: A9860-655-0A0C
MO-654DE/MO-644: A9860-655-0A0C
MO-623: A9860-655-0A0C
MO-50e: 40131948
MO-80CB: 40131948
MO-1200QVP: A9860-655-0A0C
MO-2000QVP: 40138121
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.