Original Juki foot for model MO-1000 and MO-2000QVP sergers.
Used for regular overlock stitching and overlocking the edge of fabric to swing in tape.
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
This presser foot is used for sewing on nylon thread or wire for crafts.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.
Part Number: A98256340A0 and A91307770A0
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines
The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver
Compatible with Juki TL machines and J-150 QVP. Such as: