juki1508N

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine

$3,599.00

The Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for
general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

SKU: JUKI-1508N Category: Tags: , , , , , , ,

Description

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.

The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial.

The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).

A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)

The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.

The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Standard Features

  • A new feed mechanism with a rectangular feeding motion prevents stitch gathering
  • The alternating vertical movement mechanism prevents irregular stitches
  • Consistent seam quality
  • Higher lift of the presser foot
  • The machine comes with a dual-tension mechanism
  • The highly efficient vertical-axis double-capacity hook is equipped as standard
  • Improved operability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs


Machine Catalog

Machine Manual

Video Tutorials

Quick Comparison

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJuki MO-6814S Overlock Industrial Serger removeFree Motion Quilting Rings removeJuki Travel Bag removeJuki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor removeJuki DNU-1541S Industrial Walking Foot Single Stitch Machine with Servo Motor remove
NameJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJuki MO-6814S Overlock Industrial Serger removeFree Motion Quilting Rings removeJuki Travel Bag removeJuki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor removeJuki DNU-1541S Industrial Walking Foot Single Stitch Machine with Servo Motor remove
Imagejuki1508NMO 6814S OverlockIndustrialSergerjukiquiltringsjukitrolleybagsmall15604Juki 1541S
SKUJUKI-1508NJUKI-MO6814s-1GFM-QUILT-RINGS14194-DS19LU-1560NJUKI- DNU1541S
Rating
Price$3,599.00$1,699.00 – $1,828.00$75.99 – $145.99$129.00 – $149.99$3,999.00$1,895.00 – $2,258.99
Stock

4 in stock

1 in stock

Availability4 in stock1 in stock
Add to cart

Add to cart

Select options

Select options

Select options

Add to cart

Select options

DescriptionThe Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		The Juki MO-6814S- High Speed Industrial 4 Thread Overlock Stitch Serger  Take it up a notch with a professional serging machine.  Increase your quality of sewing and increase your productivity with the Juki MO-6814S.  It's easy to use while sewing beautiful seams that increase durability. This advanced overlock machine is responsive from light to heavy weight materials with a lower applied tension

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		Free motion quilt with ease using the Free Motion Quilting Rings! These help improve the guidance of your quilt by providing no-slip bottoms and using durable high-density polyurethane (HDPE) construction. Each hoop is designed with comfortable hand grips for easy control and to keep your hands safely away from the sewing head. The wide groove cut in each hoop allows for easy access to your machine’s presser foot. Comes in an 8" ring, 11" ring, or a set of both.The Juki Trolley bag is a available in size large and small to fit most of the Juki Machines available. The large trolley bag is perfect for the Kirei HZL-NX7 and Sayaka DX-3000QVP while the small trolley bag is perfect for most sewing machines and sergers on the Juki product line. The ability to load your machine via the front or top load makes transporting your machines easy. Dimensions for Large trolley bag: 23" W x 16" H x 12.5" D Dimensions for Small trolley bag: 10" (w) x 19" (l) x 16" (h)

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4" apart. Need stitches wider? Let us know so we can modify it for you. The needle gauge can be prepped at 3/16, 1/4, 5/16, 3/8, or 1/2 an inch. 

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select "Freight Charges" upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

The Juki DNU 1541S is a single needle, straight stitch, walking foot industrial beast of a machine. The higher lift of the presser foot lifts up to 16mm/ 0.63 making ideal for heavy layers of material. The machine delivers increased productivity at a sewing speed as high as 2,500 SPM with a 18.5 inch throat. This machine has the option of a needle positioner and/or casters for an additional fee. Please select option when adding product to cart.

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.

SHOP BOBBINS HERE J7RCB65InstructionsCatalog1541 Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.
Content

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Juki MO-6814S - 4 Thread High-speed Overlock Industrial Serger with Table, Stand and Servo Motor

This advanced overlock machine is easier to use and promises superior cost effectiveness. Table dimensions are: 21 x 48"

The machine achieves beautifully finished seams of improved quality even when run at a high speed.

The machine is widely applicable to the sewing of light (like silk, chiffon, lace)- to heavier materials (2-3 layers of 2 ply denim). Since the machine is provided with a needle thread take-up mechanism and a looper thread take-up lever, it ensures high-quality, well-tensed and soft seams with a beautiful texture which flexibly correspond to the elasticity of the materials even when run at speeds as high as 7,000 sti/min. In addition, the machine has a wider and brighter needle entry and provides improved responsiveness to the materials, thereby helping the operator use the machine more easily. The optimally-balanced design of the machine reduces both operating noise and vibration, contributing to more comfortable sewing work.   Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.   

8" Free Motion Quilting Ring

Control your fabric and reduce hand, wrist, and shoulder use while using the quilting ring! This 8" Free Motion Quilting Ring helps improve the guidance of your quilt by providing no-slip bottoms and using durable high-density polyurethane (HDPE) construction. Each hoop is designed with comfortable hand grips for easy control and to keep your hands safely away from the sewing head. The wide groove cut in each hoop allows for easy access to your machine’s presser foot. Model and Part Number: GFM-08

11" Free Motion Quilting Ring

Control your fabric and reduce hand, wrist, and shoulder use while using the quilting ring! The 11" Free Motion Quilting Ring helps improve the guidance of your quilt by providing no-slip bottoms and using durable high-density polyurethane (HDPE) construction.
Each hoop is designed with comfortable hand grips for easy control and to keep your hands safely away from the sewing head. The wide groove cut in each hoop allows for easy access to your machine’s presser foot.Model and Part Number: GFM-11

8" and 11" Free Motion Quilting Rings (set of 2)

Free motion quilt with ease using the Free Motion Quilting Rings! These rings come in a set of 2 and help improve the guidance of your quilt by providing no-slip bottoms and using durable high-density polyurethane (HDPE) construction. Each hoop is designed with comfortable hand grips for easy control and to keep your hands safely away from the sewing head. The wide groove cut in each hoop allows for easy access to your machine’s presser foot. Free Motion Quilting Rings includes options for an 8” round hoop and an 11” round hoop. Model and Part Number: GFM-08-11  

Compatible Machines:

https://jukijunkies.com/product/juki-miyabi-j-350qvp-longarm-quilting-machine/

The Juki Wheeled Trolley bag come in a size large and small with the ability to load your machine via the front or top load.

The large Juki trolley bag can accommodate large machines such as the Kirei HZL-NX7 and Sayaka DX-3000QVP. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Large trolley bag: 23" (W) x 16" (H) x 12.5" (D)

  • What machines does the L trolley bag fit? NX7, DX-3000, DX4000, plus the  Juki DX, TL , HZL machines with LOTS of room on the sides for more fabric!!

The small Juki trolley bag can accommodate most sewing machines and sergers on the Juki product line. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI QVP logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Small trolley bag: 10" (W) x 19" (L) x 16" (H)

  • What machines does the small fit? (Juki DX, TL , HZL and more.)

Part Number: 14194-DS19

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4"

The Juki LU-1560N unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 2-needle machines, other models intended for special purposes are available, one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.

The higher lift of the presser foot lifts up to 16mm by knee and 9mm by hand making ideal for heavy layers of material. The machine delivers increased productivity at a sewing speed as high as 2,500 Stitches per minute  with a throat space of 517mm×178mm.

This machine has the option of a needle positioner and/or casters for an additional fee. Please select option when adding product to cart.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.

Improved Provability for the Juki LU-1650N

  • The stitch length can be easily selected by the stitch dial.
  • The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).
  • A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
  • The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.
  • The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The area around the needle entry is designed to be easily observed (LU-1560N-7, LU-1561N-7)

Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.

The walking foot and presser foot's alternating vertical movement can be set and changed with ease (LU-1560N-7, LU-1561N-7)

  • The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head.
  • In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times.
  • The machine is equipped with an instantaneous changeover device for alternating the vertical movement amount of the walking foot and presser foot, which demonstrates its capability for processes involving sewing products with a lot of multi-layered portions.

A helpful automatic reverse feed function is provided as standard (LU-1560N-7, LU-1561N-7)

  • With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption.
  • The auto-lifter (pedal switch type) helps to increase efficiency by reducing operator fatigue.

Thread trimming without fail (LU-1560N-7, LU-1561N-7)

The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.

  • Bottom-feed micro-adjustment mechanism is provided as standard (LU-1510N-7, LU-1511N-7)

    The 1-needle type machine is equipped with a bottom-feed micro-adjustment mechanism with the needle feed amount fixed. This helps prevent irregular stitches which are free from pitch errors.
 

The Juki DNU 1541S is a single needle, straight stitch, walking foot industrial beast of a machine. 

The higher lift of the presser foot lifts up to 16mm/ 0.63' making it ideal for heavy layers of material.  The machine delivers increased productivity at a sewing speed as high as 2,500 SPM with a 18.5 inch throat.  The alternating vertical movements of the walking foot and presser foot alternate between 2.5 - 6.5mm and it remains unchanged even when the thickness of the material changes.  Table included: Size 47" x 21" Table comes assembled Included: Light, Knee Raise, Bobbin Winder, Pack of Needles, bobbin, thread stand We recommend the servo motor speed control; it’s easier to use for those that don’t require the high speed stitching.  Motor Power: The 1541S has a 650w (just under 1hp) motor. The 1541S with the needle positioner has a 550w (3/4 hp) motor that is also a brushless and digital motor.

Recommended for:  Bag makers, leather work, upholstery, and more. 

Materials: leather, upholstery, marine vinyl This product is sold as a complete unit. It comes delivered on a palette with the table assembled and the machine in a box.  All you have to do is add the belt to the motor, assemble spool holder and tension dials.  Additionally,  machine needs to be dropped into table with safety clips. Returns: Due to the delivery and size of the machine returns are not accepted.  Variations: Due to the nature of industrial sewing machines table colors may vary. Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki DNU 1541S-Curbside delivery by freight. The table comes assembled on a palette and the machine in a box.

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out.  For additional information we recommend you look at the brochure below this section and the features tab.  Supplies for this machine: The oil that's used for this machine is available here. Optional Accessories here
J7RCB65InstructionsCatalog1541

Check out our educational videos in our videos tab ↑

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Specifications

• Sewing Speed: Max. 7,000spm
• Needles: DC x 27
• Max. Stitch Length: 0.6 ~ 3.8 (4.5) mm
• Dimensions:
• Machine Weight: 59.5lbs (27kg)
Select Package

MO-6814S + Table, MO-6814S + Table + Casters
Size

, ,

Fiber Content

Specifications

• Sewing Speed: 2500 SPM
• Straight Stitch Only
• Max. Stitch Length: 9 mm
• Weight: 78.6lbs
• Dimensions: 18.78 inches X 7.01 inches/ 477mm × 178mm
• 18.78 inches X 7.01 inches Throat Space
Select Package

1541S + Table, 1541S + Table + Casters

Related products