This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
The large needle hole makes this throat plate ideal for sewing heavyweight materials. This plate is designed for sewing with thicker weight fabric as well as a heavy amount of fabric to prevent your needle from tugging resulting in damaging your regular stitch plate.
This is compatible with:
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Content
Use this foot to apply piping or welt cording. Can be used with welt cord or piping that is already covered or cover it yourself.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.
Part Number: A98256340A0 and A91307770A0
The large needle hole makes this throat plate ideal for sewing heavy-weight materials.
This plate is designed for sewing with thicker weight fabric as well as a heavy amount of fabric to prevent your needle from tugging, resulting in damaging your regular stitch plate.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves