This presser foot is designed specifically for sewing chain stitches.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Content
This box collects scraps of fabric cut by the overlock sewing machine.
This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.
Series & Part Number
MO-1000/2000: 40134096
MO-735: A9108-130-000
MO-114D/104D: A910-880-L000
MO-655: A9108-202-000
MO-654DE: A9108-202-000
MO-644D: A9108-202-000
MO-623: A9108-202-000
MO-1200QVP: A910-880-L000
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.
Part Number: A98256340A0 and A91307770A0
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.