JUDY SEWING CABINET

$899.00

The Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.

SKU: JUDY-CABINET Categories: ,

Description

This sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.

 Cabinet Open:

    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height

*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.

  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy.

Incompatible Machines:

  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.

The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Standard Features

  • Sew in any position, flatbed or free-arm, with the ergonomic adjustable height hydraulic airlift mechanism
  • Store machine effortlessly
  • The Judy Cabinet is ideal for Sewing Machines up to 55 ibs, Width: 21” (left to right), Depth: 11 ⅜” (front to back), Height: 13″
  • Locking swivel casters allow for steady sewing and easy movement in your room
  • Optional machine specific custom insert available for any sewing machine model
  • Easy assembly
  • Additional information can be found on our Judy Cabinet informational sheet
  • Arrow Sewing Furniture Ten-Year Limited Warranty

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Catalog Coming Soon!
Manual Coming Soon!

Video Tutorials

Quick Comparison

SettingsJUDY SEWING CABINET removeAVA J EMBROIDERY CABINET removeGIDGET I TABLE removeDINGO II CUTTING & STORAGE CABINET WHITE removeKANGAROO AUSSIE II WHITE removeEMU CABINET remove
NameJUDY SEWING CABINET removeAVA J EMBROIDERY CABINET removeGIDGET I TABLE removeDINGO II CUTTING & STORAGE CABINET WHITE removeKANGAROO AUSSIE II WHITE removeEMU CABINET remove
ImageJudyCabinet white displayAvaEmbroideryCabinet White openGidget 1 table white opendingoIItablewhiteKangarooAussie ll cabinet white openKangarooEmuCabinet
SKUJUDY-CABINETAVACABINET-WHITEGidgetONEDINGO-WHITEAUSSIE-WHITEEMU-CABINET
Rating
Price$899.00$1,399.00$229.00$2,199.00 $1,999.00$1,699.00
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

DescriptionThe Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

The Arrow Gidget I is an affordable table, that allows the sewer to have a greater workspace while sewing and or quilting. This sturdy table allows a flat bed sewing experience vs. a raised table that normally would come with your machine. This means the sewer or quilter will be more comfortable while sewing and having a great workspace. Compared to Arrow Gidget II Table   this table is much smaller  measuring at  (17 ½” W vs 7 ⅜” D) ***** THIS TABLE DOES NOT WORK FOR JUKI TL MODELS  with an insert or any Juki F Series or Juki DX models. ****

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.The Emu sewing cabinet is the center island in your craft room. The Emu measures 36” tall and offers a spacious 24” x 12” opening with a three position airlift mechanism that moves your sewing machine or serger up and down into position with a push down.  The lift will support a 55 pound sewing machine. The sewing machine platform is height adjustable allowing you to adjust the height based on your sewing machine's measurements.
ContentThis sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.  Cabinet Open:
    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height
*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.
  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy. Incompatible Machines:
  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.
The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

We love paring the Ava cabinet with the JUKI/TAJIMA SAI 8 NEEDLE EMBROIDERY COMMERCIAL MACHINE

CABINET SPECIFICATIONS

  • Ava B Opening:
    • 12 ½” W
  • Ava J Opening:
    • 7 ½” W
  • Dimensions:
    • 35 ½” W x 23 ½” D X 35″ H
  • 2 Drawer Dimensions:
    • 26 ¾” W x 16″ D x 2″ H
  • Single Drawer Dimensions:
    • 13″ W x 16 ¼” D x 5 ½” H
  • 2 Cubby Dimensions:
    • 13″ W x 22 ¾” D x 7″ H
  • Side Storage Shelf Dimensions:
    • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

  • The Ava ships ready to assemble in four boxes.
  • Ava weighs a total of 199 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Ava Assembly Manual PDF file and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench

A great sewing table that is strong, supportive and can be easily tucked away. Luckily, the Gidget I Table is all of these things and more! With powerful steel locking legs, ergonomic height positioning and a collapsible frame for easy storage, the Gidget I is there when you need it and out of sight when you don’t.

Use the Gidget I as your everyday table, or as your traveling table to be creative anywhere at any time!

What we love about the Gidget table is that it allows you to have a larger work space for sewing and quilting.

gidget table 2 with dx7

TABLE SPECIFICATIONS

  • Dimensions Open:
    • 40″ W x 19 ¾” D x 28 ¼” H
  • Dimensions with Legs Folded:
    • 40″ W x 19 ¾” D x 4 ½” H
  •  The Gidget I Table will accommodate sewing machines no larger than:
    • 17 ½” W (left to right)
    • 7 ⅜” D (front to back)
    • If your machine is equal to or less than those measurements, it will fit the opening.
  • Construction: Melamine/MDF with Steel Legs

SHIPPING INFORMATION

  • The cabinet is fully assembled and shipping one box
  • Gidget I weighs a total of 35 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • Please email our store with your machine type so that we may order your insert. There is an additional charge.

COMPARE GIDGET I VS. GIDGET II

  • Gidget I has a smaller opening size (17 ½” W vs 7 ⅜” D) compared to the large opening on Gidget II (23 ½” W x 12” D)
  • Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs.
  • Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs.
  • Gidget II will require a  custom insert for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.

ASSEMBLY INSTRUCTIONS

The Gidget I arrives fully assembled, however, we have a few helpful documents to make your set-up easier. You may also download documents and save them to your computer. Adjusting the height of the platform with an insert 601/611 Manual – Adjusting the Flatbed Position 

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

  • Dimensions Closed:
    • 46 ¼” W x 21 ¼” D x 35 ¼” H
  • Dimensions Open (leaf open):
    • 46 ¼” W x 40 ½” D x 34 ¼” H
  • Drawer Dimensions:
    • All nine drawers are19 ¾” W (left to right)
    • All nine drawers are 15” D (front to back)
    • Drawer Heights (top to bottom):
      • Seven of the drawers are 3 ¼” H
      • Bottom left drawer is 7 ⅛” H
      • Bottom right drawer is 12 ¼” H
        • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

  • The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
  • The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Dingo II Cutting and Storage Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.

This cabinet comes in both Teak and Ash White.

CABINET SPECIFICATIONS

  • Open Cabinet Dimensions:
    • Quilt leaf open & rolling caddy extended in front:
      • 100 ½” W x 80 ¼” D x 29 ½” H
    • Quilt leaf folded down and the rolling caddy is tucked away:
      • 100 ½” W x 22 ¼” D x 29 ½” H
    • Closed Dimensions:
      • 49 ¾” W x 22 ¼” D x 30 ¼” H
  • Caddy Dimensions:
    • 13 ⅜” W x 16″ D x 13 ½ ” H
    • Drawer Dimensions (two drawers)
      • 11″ W x 11 ⅛” D x 2 ¾” H
  • Door Bin Dimensions:
    • Large: 17″ W x 5 ¼” D x 5 ¼” H
    • Small: 17” W x 3 ⅛” D x 3 ⅛” H
  • Aussie II is ideal for Sewing Machines:
    • Up to 55 pounds
    • Maximum Machine dimensions:
      • Width: 23 ¾”  (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14 ½”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

We are aware of the following sewing machines that are too large to fit into the Aussie II sewing cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna – eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

CABINET SPECIFICATIONS

  • Open Cabinet Dimensions:
    • Quilt leaf open & rolling caddy extended in front:
      • 100 ½” W x 80 ¼” D x 29 ½” H
    • Quilt leaf folded down and the rolling caddy is tucked away:
      • 100 ½” W x 22 ¼” D x 29 ½” H
    • Closed Dimensions:
      • 49 ¾” W x 22 ¼” D x 30 ¼” H
  • Caddy Dimensions:
    • 13 ⅜” W x 16″ D x 13 ½ ” H
    • Drawer Dimensions (two drawers)
      • 11″ W x 11 ⅛” D x 2 ¾” H
  • Door Bin Dimensions:
    • Large: 17″ W x 5 ¼” D x 5 ¼” H
    • Small: 17” W x 3 ⅛” D x 3 ⅛” H
  • Aussie II is ideal for Sewing Machines:
    • Up to 55 pounds
    • Maximum Machine dimensions:
      • Width: 23 ¾”  (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14 ½”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The entire Aussie II features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in 5 separate boxes
  • Aussie II weighs a total of 235 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the Aussie II Assembly manual and save them to your computer. For assembly, you will need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench

The Emu sewing cabinet is the center island in your craft room. The Emu measures 36” tall and offers a spacious 24” x 12” opening with a three position airlift mechanism that moves your sewing machine or serger up and down into position with a push down.  The lift will support a 55 pound sewing machine. The sewing machine platform is height adjustable allowing you to adjust the height based on your sewing machine's measurements.

CABINET SPECIFICATIONS

  • Cabinet dimensions:
    • Open: 71” W x 31 ⅜ ” D x 36 ⅛ ” H
    • Closed: 36 ½” W x 31 ⅜ ” D x 36” H
  • Drawers (5 – storage side)
    • Small drawers (4 total): 11 ¾” W x 7 ⅜ ”  D x 3 ⅞ ” H
    • Larger drawer (1 total): 11 ⅞ ” W x 7 ⅜ ” D x 8 ⅛ ” H
  • Adjustable shelves (3 – storage side): 17” W x 10 ⅜ ” D
  • Adjustable shelves (5 – lift side): 4 ½ ” W x 9 ⅝” D
  • Emu Cabinet is ideal for Sewing Machines:
    • Up to 55 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½ ” (front to back)
      • Height: 14”
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The Emu features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT EMU SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Emu Cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
Sewing machines that will fit, but have special requirements:
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.
  • Storage includes: 
    • Three adjustable shelves to the left of sewing well (lift side)
    • Five drawers located on the opposite side of the sewing well (storage side)
    • Five adjustable shelves on the opposite side of the sewing well (storage side)
  • Adjustable three-position airlift:
    • Moves your machine into three positions: free arm, flatbed, and storage
    • Manual platform design with a 55-pound sewing machine capacity

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in five separate boxes
  • Emu weighs a total of 226 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Emu Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information