Use this foot to apply piping or welt cording. Can be used with welt cord or piping that is already covered or cover it yourself.
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
Compatible with all Juki TL models. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins.
Content
Use this foot to apply piping or welt cording. Can be used with welt cord or piping that is already covered or cover it yourself.
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
This throat plate prevents stitching shrinkage and keeps lightweight materials out of the needle hole. Recommended Needle size #9 to #11
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.
This presser foot is used for sewing on strands of pearls, beads or sequins.
Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.