This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This presser foot is used for free-motion sewing of cording.
This presser foot is designed specifically for sewing chain stitches.
This presser foot is used to sew blind hem stitching, decorative flatlock or pintucks.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. This gauge can be swung toward you so that it is out of the way when not in use.
Compatible with Juki TL machines and J-150 QVP. Such as:
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
Compatible with all Juki TL models. Such as:
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.
Series & Part Number
MO-2800: 40149058
MO-1000: 40149058
MO-735: A9521-634-0A0A
MO-114D/104D: A9521-634-0A0A
MO-655: A9521-634-0A0A
MO654DE/MO-644: A9521-634-0A0A
MO-623: A9521-634-0A0A
MO-50e: 40131946
MO-80CB: 40131946
MO-1200QVP: A9521-634-0A0A
MO-2000QVP: 40149058
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.
The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves
The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.
Compatible with Juki TL machines and J-150 QVP. Such as:
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
This throat plate prevents stitching shrinkage and keeps lightweight materials out of the needle hole. Recommended Needle size #9 to #11
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.