Button Attaching Presser Foot

• Be sure to first lower the feed dog so the fabric is not fed and adjust the zigzag width so the needle enters the holes in the button.
• To create a shank for the button, insert an awl or another similar object into the groove in the presser foot before sewing on the button so that the stitching will create a loop suitable for the thickness of the fabric.

This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.

• This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.

• Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.

Series & Part Number

• MO-2800: 40149058

• MO-1000: 40149058

• MO-735: A9521-634-0A0A

• MO-114D/104D: A9521-634-0A0A

• MO-655: A9521-634-0A0A

• MO654DE/MO-644: A9521-634-0A0A

• MO-623: A9521-634-0A0A

• MO-50e: 40131946

• MO-80CB: 40131946

• MO-1200QVP: A9521-634-0A0A

• MO-2000QVP: 40149058

This presser foot is used for sewing on piping while overlocking the edge of the fabric.

• Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.

Series & Part Number

• MO-2800: 40138103
• MO-1000: 40138103
• MO-735: A9865-655-0A0A
• MO-114D/104D: A9865-655-0A0A
• MO-655: A9865-655-0A0A
• MO654DE/MO-644: A9865-655-0A0A
• MO-623: A9865-655-0A0A
• MO-50e: 40131950
• MO-80CB: 40131950
• MO-1200QVP: A9865-655-0A0A
• MO-2000QVP: 40138103

This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.

• This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.

Series & Part Number

• MO-735: 40122229
• MCS-1500: 40177371
• MCS-1700QVP: 40177371

This presser foot is used for sewing on nylon thread or wire for crafts.

• Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.

Series & Part Number

• MO-2800: 40138099
• MO-1000: 40138099
• MO-735: A9820-655-0A0A
• MO-114D/104D: A9820-655-0A0A
• MO-655: A9820-655-0A0A
• MO654DE/MO-644: A9820-655-0A0A
• MO-623: A9820-655-0A0A
• MO-1200QVP: A9820-655-0A0A
• MO-2000QVP: 40138099

This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.

• With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric.

THIS IS FOR JUKI TL MODELS ONLY. Compatible with:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: 40166729