7 Hole Cording Foot

With the 7 Hole Cording Foot, you can enjoy sewing 3-dimensional decorative stitches using thin cords or embroidery threads (up to seven cords/threads) together.

• This presser foot is provided with seven cord insertion holes of approximately 1mm in diameter. As many as seven thin cords or embroidery threads can be sewn using these holes while neatly arranging them in parallel (in the case of two or more cords/threads are used).

Series & Part Number

• HZL-DX Series: 40219632

• Exceed(F) Series: 40219632

• HZL-G Series: 40219632

• HZL-NX Series: 40219632

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.

• The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines

• The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver

Compatible with Juki TL machines and J-150 QVP. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9846D250A0

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.

This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.

• With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric.

THIS IS FOR JUKI TL MODELS ONLY. Compatible with:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: 40166729

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370

This guide is used for sewing parallel rows of stitching that are equally spaced.

• This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.

• With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.

• Juki TL models include Juki TL 2010, Juki TL15, Juki TL2010Q, Juki TL2200, Juki TL2000Q, Juki TL 2000QI, Juki TL98, Juki TL18 Haruka, Juki TL2020PE, Juki 2200QVP Mini sewing machines.

Part Number: 40171424